DIY Phone Stand
Quick DIY phone stand for a Pixel 8a, but it should also work for other phones that are less than 10 mm thick.
I got inspired by the “Basic Phonestand” from “maxximum”. I’m connecting the phone with a Thunderbolt 5 cable from Eudobel, which has quite a big connector, but also a not easily bendable cable. So I designed a phone stand that would work with it. It’s a bit tall though.
The cable is maintained by a piece screwed in with two M2x16 ISO 7046 screws.
I used FreeCAD to design it: Pixel 8a phone stand.
Comments
Add one by emailing me.